Add mods: technic, moreores, paintings, Nyancat (Pbj_pup). Small fix: sandwiches

mods/pipeworks/autoplace_tubes.lua

@@ -0,0 +1,139 @@
+-- autorouting for pneumatic tubes
+
+local function is_tube(nodename)
+	return pipeworks.table_contains(pipeworks.tubenodes, nodename)
+end
+
+--a function for determining which side of the node we are on
+local function nodeside(node, tubedir)
+	if node.param2 < 0 or node.param2 > 23 then
+		node.param2 = 0
+	end
+
+	local backdir = minetest.facedir_to_dir(node.param2)
+	local back = vector.dot(backdir, tubedir)
+	if back == 1 then
+		return "back"
+	elseif back == -1 then
+		return "front"
+	end
+
+	local topdir = pipeworks.facedir_to_top_dir(node.param2)
+	local top = vector.dot(topdir, tubedir)
+	if top == 1 then
+		return "top"
+	elseif top == -1 then
+		return "bottom"
+	end
+
+	local rightdir = pipeworks.facedir_to_right_dir(node.param2)
+	local right = vector.dot(rightdir, tubedir)
+	if right == 1 then
+		return "right"
+	else
+		return "left"
+	end
+end
+
+local vts = {0, 3, 1, 4, 2, 5}
+local tube_table = {[0] = 1, 2, 2, 4, 2, 4, 4, 5, 2, 3, 4, 6, 4, 6, 5, 7, 2, 4, 3, 6, 4, 5, 6, 7, 4, 6, 6, 8, 5, 7, 7, 9, 2, 4, 4, 5, 3, 6, 6, 7, 4, 6, 5, 7, 6, 8, 7, 9, 4, 5, 6, 7, 6, 7, 8, 9, 5, 7, 7, 9, 7, 9, 9, 10}
+local tube_table_facedirs = {[0] = 0, 0, 5, 0, 3, 4, 3, 0, 2, 0, 2, 0, 6, 4, 3, 0, 7, 12, 5, 12, 7, 4, 5, 5, 18, 20, 16, 0, 7, 4, 7, 0, 1, 8, 1, 1, 1, 13, 1, 1, 10, 8, 2, 2, 17, 4, 3, 6, 9, 9, 9, 9, 21, 13, 1, 1, 10, 10, 11, 2, 19, 4, 3, 0}
+local function tube_autoroute(pos)
+	local active = {0, 0, 0, 0, 0, 0}
+	local nctr = minetest.get_node(pos)
+	if not is_tube(nctr.name) then return end
+
+	local adjustments = {
+		{x = -1, y =  0, z =  0},
+		{x =  1, y =  0, z =  0},
+		{x =  0, y = -1, z =  0},
+		{x =  0, y =  1, z =  0},
+		{x =  0, y =  0, z = -1},
+		{x =  0, y =  0, z =  1}
+	}
+	-- xm = 1, xp = 2, ym = 3, yp = 4, zm = 5, zp = 6
+
+	local adjlist = {} -- this will be used in item_transport
+
+	for i, adj in ipairs(adjustments) do
+		local position = vector.add(pos, adj)
+		local node = minetest.get_node(position)
+
+		local idef = minetest.registered_nodes[node.name]
+		-- handle the tubes themselves
+		if is_tube(node.name) then
+			active[i] = 1
+			table.insert(adjlist, adj)
+		-- handle new style connectors
+		elseif idef and idef.tube and idef.tube.connect_sides then
+			if idef.tube.connect_sides[nodeside(node, vector.multiply(adj, -1))] then
+				active[i] = 1
+				table.insert(adjlist, adj)
+			end
+		end
+	end
+
+	minetest.get_meta(pos):set_string("adjlist", minetest.serialize(adjlist))
+
+	-- all sides checked, now figure which tube to use.
+
+	local nodedef = minetest.registered_nodes[nctr.name]
+	local basename = nodedef.basename
+	if nodedef.style == "old" then
+		local nsurround = ""
+		for _, n in ipairs(active) do
+			nsurround = nsurround..n
+		end
+		nctr.name = basename.."_"..nsurround
+	elseif nodedef.style == "6d" then
+		local s = 0
+		for i, n in ipairs(active) do
+			if n == 1 then
+				s = s + 2^vts[i]
+			end
+		end
+		nctr.name = basename.."_"..tube_table[s]
+		nctr.param2 = tube_table_facedirs[s]
+	end
+	minetest.swap_node(pos, nctr)
+end
+
+function pipeworks.scan_for_tube_objects(pos)
+	for side = 0, 6 do
+		tube_autoroute(vector.add(pos, pipeworks.directions.side_to_dir(side)))
+	end
+end
+
+function pipeworks.after_place(pos)
+	pipeworks.scan_for_tube_objects(pos)
+end
+
+function pipeworks.after_dig(pos)
+	pipeworks.scan_for_tube_objects(pos)
+end
+
+-- Screwdriver calls this function before rotating a node.
+-- However, connections must be updated *after* the node is rotated
+-- So, this function does the rotation itself and returns `true`.
+-- (Note: screwdriver already checks for protected areas.)
+
+-- This should only be used for tubes that don't autoconnect.
+-- (For example, one-way tubes.)
+-- Autoconnecting tubes will just revert back to their original state
+-- when they are updated.
+function pipeworks.on_rotate(pos, node, user, mode, new_param2)
+	node.param2 = new_param2
+	minetest.swap_node(pos, node)
+	pipeworks.scan_for_tube_objects(pos)
+	return true
+end
+
+if minetest.get_modpath("mesecons_mvps") then
+	mesecon.register_on_mvps_move(function(moved_nodes)
+		for _, n in ipairs(moved_nodes) do
+			pipeworks.scan_for_tube_objects(n.pos)
+			pipeworks.scan_for_tube_objects(n.oldpos)
+		end
+	end)
+end
+